Tuesday, January 29, 2008

Epson CX5500 & CX5505



I post it in new thread coz its new adjustment. Happy download !
As I promised there is no password :) , and for this one no need to change the date

plz do post in the comment if u succeded the reset for this type

Epson CX5500 and CX5505 Adjustment

Thursday, January 17, 2008

Canon MPC190 Waste Ink Counter Reset |


Reset Waste Ink Canon MPC190
1) Enter SERVICE MODE.---
By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Saturday, January 12, 2008

canon i320- i255 waste error

GENERIC “S” SERIES RESET CODE.


This reset is an emailed submission. But the person who sent it in requested their name to be withheld.

This reset is for the S series printers. This does look like the same reset for the S9000 but has a little more detail.

Waste Ink Counter Reset.

(1) Turn off the printer.

(2) Press and hold the RESUME button, then press and hold the POWER button.

(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note:

you are still holding the POWER button). The printer's carriage will “reset" or move momentarily.

If the above was properly performed the printer will enter the "Service Mode".

(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.


1. Service/Factory test printout, including ink sensor check.

2. EEPROM - Info printout.

3. EEPROM – Initialization.

4. Reset the Waste ink counter.

5. Printer model setting. (More selections beyond this point – However it is best leave them unaltered – You have been warned!)


After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the

function selection menu. Press the POWER button again to restart the printer.

Download resetter

Friday, January 11, 2008

Epson Stylus Color C20,C40

Tags
Dear all reseter's

Service (Adjustment) Programs



Since your printer consumes ink not only for printing but also for other operations like cleaning, a certain amount of ink is wasted and it is collected by the waste ink pad. Therefore, the printer counts the amount of waste ink.
Once the amount of waste ink reaches the predefined limit, the printer indicates "MAINTENANCE REQUEST" and the waste ink pad should be replaced. Also, you must reset the maintenance error condition and the waste ink counter value stored in EEPROM on the mainbord of the printer.

The adjustment program enables you to perform maintenance and adjustment functions such as:

- EEPROM initial setting
- Ink Pad Counter reset
- Initial Ink Charge
- Head ID Setting
- Top margin Adjustment
- Bi-D Adjustment
- USB ID Input

Note: The above list is related to models Epson C20 and C40 only. Other printer models may have different set of functions, and you must doublecheck the service manual for a specific printer that you are going to troubleshoot.

Warning: misuse of a program may damage printer's EEPROM! Under Window 98 only.
This service program can be Adjustment program epson downloaded FREE!

Today you can download FREE Service Programs:

Epson Stylus Color C41, C42 printer service program (under Windows 98 only) download (462kB) FREE!Epson Stylus Photo 900 printer service program (under Windows XP, 2000) download (571kB) FREE! Stylus Epson Stylus Color C60 printer service program (under Windows 98 only) download (609) FREE!

sumber: 2manuals.com

Resetter Canon MP190

Tags
Dear all reseter's

Reset Waste Ink full canon
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of
3)), and then press the [ON/OFF] key

Resetter canon MP110

Tags
Dear all reseter's

1)Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by presing <--- or ---> then OK
3) Enter CMY ink level by pressing <--- or ---> then OK
4) Select 1 by presing <--- or ---> then OK
5) Enter K ink level by presing ---> then OK
6) select 1 by presing <--- or ---> then OK
7) Press reset ( design: // )
8) SERVICE MENU COUNTER ACCESSPRINT PAGE COUNT SCAN PAGE

Reset Canon IP2000/3000

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

Reset Printer:
http://rapidshare.com/files/28141088/ip2000.zip

# Driver Canon PIXMA IP2000 Download
# Driver Canon PIXMA IP2200 Download

Reset Canon Type iP

Tags
Resetter Canon iP 1200, 1300, 1600, 1800, 1880, 2200, 2500
reset Ink Counter
Reset Waste Ink Counter
Print Head Cleaning
Cleaning
Dry Level
Change Model
EEPROM Operationand Print Head Test

iP Tool : Download
EEPROM Printer Canon ip6210D/6220D/MP170/MP450/2200/ip600 Download
MPTool MP150/MP160/MP170/MP180/MP450/MP460 Download

SSC Service Epson

Tags
SSC Service for Epson Stylus Printers.Main features.
SSC Service allow you to do many amazing things with Your Epson printer :



1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers,
powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!Please, read all instructions in help file before doing anything with Your printer!Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !Program screenshots:




Click picture to EnlargeThis menu can be accessed by right clicking on the application icon located in tray.
NOTE!
1) This is freeware project, so it is illegal to take money for this software.
2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sitesis prohibited!(с) 2002-2007 SSC Localization Group

ssc service download ssclg.com

resetter canon i320 i255

Tags
Waste Ink Counter Reset.
Step Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

or

Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3.Choose (SET DESTINATION 1) And it should be reset.

Sofware Download "After service mode Pls use software for permanent reset"

Reset CANON Pixma iP1000

Dear all reseter's

Waste Ink Counter Reset Manual for Service modeStep 1:
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Step 2 :
Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000"

Sofware Download: Download

3. Select (USB PORT)
4. Choose (SET DESTINATION 1)

Canon iP1200 iP1600 iP2200 reseter

Tags

Reset Ink Counter/Level Canon iP1600

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

This is the most downloads for reseters ( according to my downloads count )
Just download at this link : Reset Canon iP1200,1600,2200 : Download

# Driver Canon PIXMA IP1200 Download
# Driver Canon PIXMA IP1600 Download

Canon iP1500 Resetter

Waste Ink Counter Reset. Manual for Service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green
6. Release both buttons

resetter Canon IP1500 : Download

Driver Canon PIXMA IP1500 Download

Manual Reset_iP1500.pdf

Printer HP

Tags
Dear all reseter's

To clear the Maintenance Service Message from the LCD display:

Printer
HP IIISi Printers:

  1. Press ONLINE until the light goes off
  2. Hold down MENU until PCL CONFIG MENU appears
  3. Press the MENU key until SERVICE MSG=ON* appears
  4. Press the + or - key to change display to SERVICE MSG=OFF
  5. Press ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE
Printer
HP 4Si Printers:
  1. Press ONLINE until the light goes off
  2. Press MENU until CONFIG MENU appears
  3. Press the ITEM key until SERVICE MSG=ON* appears
  4. Press the + or - key to change display to SERVICE MSG=OFF
  5. Press the ENTER key to turn message off, the * should appear, then press ONLINE

Printer HP 5Si:
  1. Press MENU key 4 times for CONFIG MENU
  2. Press ITEM to display SERVICE MESSAGE=OFF
  3. Press ENTER
  4. Press ONLINE
Printer HP 4000/4050/4100/5000 Printers:
  1. Turn the printer off
  2. Hold down the left side of the ITEM and VALUE +/- keys, turn the printer on and wait until RESET MAINTENANCE COUNT is displayed and then release the keys
Printer HP 4500/4550 Printers:
  1. Turn the printer off
  2. Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on
  3. Press the right side of the MENU key, then press the SELECT key
  4. You will enter SERVICE MODE after the normal test completes
  5. Press the ITEM key until the FUSER MAINTENANCE COUNT appears
  6. Press VALUE +/- to change to zero
  7. Press SELECT to save
  8. Press GO; the printer should return to READY
Printer HP 8000/8100/8150 Printers:
  1. Press the MENU button until the display reads CONFIGURATION MENU
  2. Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
  3. Select OFF*
  4. Press SELECT to save
  5. Turn printer off
  6. Hold the VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand then release both buttons
Printer HP 9000 Printers:
  1. Turn the printer off
  2. Press and hold the CHECK key
  3. Power on the printer
  4. Release the CHECK key after all three lights come on The display should read SELECT LANGUAGE.
  5. Press the up arrow until MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset
HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):
  1. Press the MENU button until the RESETS MENU is displayed
  2. Press the ITEM button until TRANSFER KIT SELECT IF DONE is displayed
  3. Press the SELECT button
  4. Press the GO button to return to READY
HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):
  1. After Maintenance is performed, the display should read NEW TRANSFER KIT =
  2. Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW TRANSFER KIT and select
HP Color LaserJet 4600 Printer (FUSER KIT RESET):
  1. After Maintenance is performed, the display should read NEW FUSER KIT =
  2. Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW FUSER KIT and select
HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):
  1. Press the MENU button until the RESETS MENU is displayed
  2. Press the ITEM button until RESET TRANSFER LIFE COUNT is displayed
  3. Press the SELECT button to reset, then GO to return to READY
HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):
  1. Press the MENU button until the RESETS MENU is displayed
  2. Press the ITEM buton until RESET FUSER LIFE COUNT is displayed
  3. Press the SELECT button to reset

Reset Printer Canon and Manual service

Tags
Dear all reseter's

This is How to Reset Canon Pixma iP 2000 :
http://rapidshare.com/files/82936240/Pixma_iP2000.zip
Printer Xnu i550 i850 i950
http://rapidshare.com/files/82937173/xnu_i550_i850_i950_SM.zip
Printer xnu i450
http://rapidshare.com/files/82937427/xnu_i450_SM.zip


reset canon

Reset canon i255 i355
Reset canon iP1000
Reset iP1500 canon
manual service canon iP2000 resetter
resetI250-I350
Reset_i320
Download : http://rapidshare.com/files/84970258/resetprint.zip

Reset printer Canon BJC-2000 BJC-2100

Tags
Dear all reseter's

Reset Waste Ink Canon
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within
7. Seconds and release the RESUME/RESET .
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Press and HOLD RESUME/RESET for two seconds or more and release it.
10.Unplug AC Power Cord to set data.

reset canon BJC 1000 Series

Tags
Dear all reseter's

Canon Waste Ink Tank Reset Procedures
1: Remove Cartridge2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within
5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Canon printer i850, i950, S600

Tags
Dear all reseter's

Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing Select function with RESUME press POWER to execute: presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter