Refill Instructions HP Cartridge C9352 #22

1. Put the cartridge on some paper towels in an area where you can tolerate a spill.

2. Peal off the top label.

3. Fill the syringe with 5 ml. of color ink.

4. Very S-L-O-W-L-Y inject ink into each chamber until the sponge is full. A little ink might come out of the top when full, so cover up the other two holes while filling one.

5. When finished, replace the top label or leave it off (it will make no difference in the printing).

6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
Or print Test pages.

Refill Your HP 56 Cartridge

HP Officejet Series 7210

just bought a 7210 off Ebay for 99 pence (ex £14 delivery) within the description was "Carriage Jam" message so I knew it was faulty. 20 mins of Googling and a 5 minute clean has it up and running.

It did not involve loosening a single screw.

Okay, here's what I did...

- Switch on the printer.

- Open the print cartridge lid.

- Pull the plug from the back of the machine to avoid risk of electric shock.

- Using a light cleaning solution on a lint-free cloth, carefully VERY CAREFULLY, wipe the position strip (on both sides, front and back), then dry it with a dry lint-free cloth. Now move the cartridge carriage to the left and clean and dry the remaining half of the position strip. If you bend this position strip, your printer is knackered.

- Gently move the carriage back to the right.

- Holding down the OK and CANCEL buttons, plug in the power lead to the back of the printer and press the POWER button.

- Wait until the message DERIV CLEAR ('Deriv' is right - I'm not sure about 'clear' now) appears then release the OK and CANCEL buttons.

- The printer should thrash about a little, the carriage will move back and forth and then it should tell you the cartridges need changing and you follow the instructions, pressing OK or selecting the language options.

- It will print an alignment page and then you should be good to go.

I am a comms technician, I poke, I tweak. I don't give up.

Good Luck to you!

Refill HP LASERJET 12A ( HP Q2612A )

Refilling these cartridges is easy and takes less than 10 minutes. Our HP Q2612A / 12A Toner Refill Bottle is easy for anyone to do.

Refill Your HP 56 Cartridge

HP Deskjet D2566 Printer

HP Deskjet D2466 wasn't produce anymore and as the other change HP Deskjet D2566
Printing specifications
Print speed
Paper type Fast Draft
Black text, plain paper Up to 26 ppm
Mixed text/graphics, plain paper Up to 20 ppm
Image (4x6 with border), photo paper As fast as 26 seconds

Resolution
Black and color resolution on plain paper
Print Quality Render Printing
Plain paper/Fast Draft 300 x 300 dpi Automatic
Plain paper/Fast Normal 600 x 600 dpi Automatic
Plain paper/Normal 600 x 600 dpi Automatic
Inkjet paper/Best 600 x 600 dpi Automatic
Maximum dpi 1200 x 1200 dpi 4800 x 1200 optimized
Color resolution on photo paper
Print Quality Render Printing
Fast Draft 300 x 300 dpi Automatic
Fast Normal 600 x 600 dpi Automatic
Normal 600 x 600 dpi Automatic
Best 600 x 600 dpi Automatic
Maximum dpi 1200 x 1200 dpi 4800 x 1200 optimized

Duty Cycle

* Printer Monthly Duty Cycle : 1,000 pages per month
* Printer Life : 20,000 pages

Power specifications
Power Requirements
Input Voltage
Region Power supply Voltage Frequency
WW 0957-2242 100-240 VAC +/- 10% 50/60 Hz +/- 3 Hz
India/China 0957-2250 200-240 VAC +/- 10% 50/60 Hz +/- 3 Hz

Power Consumption
* Average when ready : less than 2 watts
* Average when printing : 16 watts
* Average in sleep mode : less than 2 watts
* OFF : less than 1 watt

Environmental specifications
Recommended operating conditions
Factor Specifications
Temperature 59 to 86° F; 15 to 30° C
Humidity 20-80% RH non-condensing


Maximum operating conditions
Factor Specifications
Temperature 41 to 104° F; 5 to 40° C
Humidity 15-80% RH non-condensing

Printer HP

Dear all reseter's

To clear the Maintenance Service Message from the LCD display:

Printer
HP IIISi Printers:

1. Press ONLINE until the light goes off
2. Hold down MENU until PCL CONFIG MENU appears
3. Press the MENU key until SERVICE MSG=ON* appears
4. Press the + or - key to change display to SERVICE MSG=OFF
5. Press ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE

Printer
HP 4Si Printers:

1. Press ONLINE until the light goes off
2. Press MENU until CONFIG MENU appears
3. Press the ITEM key until SERVICE MSG=ON* appears
4. Press the + or - key to change display to SERVICE MSG=OFF
5. Press the ENTER key to turn message off, the * should appear, then press ONLINE

Printer HP 5Si:

1. Press MENU key 4 times for CONFIG MENU
2. Press ITEM to display SERVICE MESSAGE=OFF
3. Press ENTER
4. Press ONLINE

Printer HP 4000/4050/4100/5000 Printers:

1. Turn the printer off
2. Hold down the left side of the ITEM and VALUE +/- keys, turn the printer on and wait until RESET MAINTENANCE COUNT is displayed and then release the keys

Printer HP 4500/4550 Printers:

1. Turn the printer off
2. Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on
3. Press the right side of the MENU key, then press the SELECT key
4. You will enter SERVICE MODE after the normal test completes
5. Press the ITEM key until the FUSER MAINTENANCE COUNT appears
6. Press VALUE +/- to change to zero
7. Press SELECT to save
8. Press GO; the printer should return to READY

Printer HP 8000/8100/8150 Printers:

1. Press the MENU button until the display reads CONFIGURATION MENU
2. Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
3. Select OFF*
4. Press SELECT to save
5. Turn printer off
6. Hold the VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand then release both buttons

Printer HP 9000 Printers:

1. Turn the printer off
2. Press and hold the CHECK key
3. Power on the printer
4. Release the CHECK key after all three lights come on The display should read SELECT LANGUAGE.
5. Press the up arrow until MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset

HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):

1. Press the MENU button until the RESETS MENU is displayed
2. Press the ITEM button until TRANSFER KIT SELECT IF DONE is displayed
3. Press the SELECT button
4. Press the GO button to return to READY

HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):

1. After Maintenance is performed, the display should read NEW TRANSFER KIT =
2. Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW TRANSFER KIT and select

HP Color LaserJet 4600 Printer (FUSER KIT RESET):

1. After Maintenance is performed, the display should read NEW FUSER KIT =
2. Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW FUSER KIT and select

HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):

1. Press the MENU button until the RESETS MENU is displayed
2. Press the ITEM button until RESET TRANSFER LIFE COUNT is displayed
3. Press the SELECT button to reset, then GO to return to READY

HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):

1. Press the MENU button until the RESETS MENU is displayed
2. Press the ITEM buton until RESET FUSER LIFE COUNT is displayed
3. Press the SELECT button to reset