Tuesday, January 27, 2009

Resetter Canon MPC190

Reset Waste Ink
1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

2 comments:

Anonymous said...

Hi Anonymous, yang benar "Reset Waste Ink Kode" perintah harus Menu Salin Pindai Salin Salin, tidak Pindai di akhir. Baca di bawah ini dan saya posting di 6/25/2006.

Prosedur B) Reset Waste Ink Kode
1) Enter SERVICE MODE dengan menekan secara berurutan Menu Copy Scan Copy Copy
2) Pilih TEST MODE.
3) Tekan '+' sampai 8 kali 'Pilih [8] PRINTER TEST in TEST MODE.
4) Pilih 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Tekan tombol [OK] key.
7) Press the [Stop / RESET] kunci (kembali ke negara 3)), kemudian tekan tombol [ON / OFF] key.
8) Selesai

Canon printer yang besar dalam hal kualitas warna dan harga. Tapi ini merupakan 'rasa sakit di J **' bila pemasangan printer:)

Walaupun demikian, masih MPC190 my printer saya yang lain di antara 2 printer HP dan Epson. Yang tinta cartridge adalah 50% atau lebih murah dibandingkan dari HP dan Canon warna kertas mencetak foto indah dari MPC190 menggunakan warna Cetak Foto Software.

Kornelius Goh
Singapura

Anonymous said...

Canon MPC INKTank FULL

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turn off)
then turn it on again. this works. thanks.