Download Resetter printer

Follow Now.......!

Friday, December 26, 2008

Canon PIXMA MP145


Reset manual "Ink Absorber Full" for pixma MP145 ( error message E27) actually , it's work as same as Canon MP 150 or MP 160, This is the step :

Canon MP145
with the printer powered off but connected to a power source , you must:
A) Press stop/reset button, and then press [ON/OFF] button to restart
B) Press [ON/OFF] again and then press twice the stop/reset button.
C) Press [ON/OFF] & Stop/reset button together, this time to enter
the repair status and power lights will be green,
D) Press stop/reset button 4x and warning lights will be go out
in [ON/OFF]button.
E) Turn off the printer.( it must be turn off) and then turn it on again.
Use with your own risk , i'll try this way and my Pixma MP145 not
blink again.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

4 comments:

Ga berhasil ni. Ada softwarenya ga? Thanks.

Thanks for sharing these steps about manual setting of Canon MP145 printer... It is useful...

thanks mp145 gua jalan lagi thankyou sekali lagi

How to clear E27 Code

* With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
* When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
* When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
* When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)

* Turn off the printer.( it must be turn off) then turn it on again.

Share

Twitter Delicious Facebook Digg Stumbleupon Favorites More